This 2020 Taylor X360M is a used high-capacity diesel forklift available in Dallas, Texas. Its stated capacity is 36,000 lb at a 24-inch load center. The hour meter currently shows 7,765 hours.
The machine runs and operates. No additional repairs, recent service work or known defects have been reported. It is offered without a warranty.
Verified equipment detailsThe included SSFP is a side-shifting fork positioner. It allows the operator to adjust fork spacing and shift the fork carriage laterally from the operator compartment. Buyers should confirm that the attachment range, fork dimensions and overall configuration suit their loads.
Application and capacity reviewThis Taylor X360M can be evaluated for high-capacity industrial material-handling work requiring a diesel pneumatic forklift, an enclosed operator compartment and long forks. The stated 36,000 lb rating applies at a 24-inch load center. Actual allowable capacity can change with the load center, lift height, attachment and operating configuration.
A data plate or load chart was not available for this listing. Buyers should verify the machine’s rating and configuration for their intended load before purchase or operation.
Request more informationContact Nick Fiene at Forklift Exchange to discuss availability, request current photos or arrange an inspection. Ask about transportation separately; no shipping terms or lead time are represented in this listing.
Availability:In Stock
| Machine Location | Dallas, TX |
|---|---|
| Model | Taylor X360M |
| Hours | 7,765 |
| Load Capacity | 36,000 at 24” Load Center lb |
| Price | $115000 |
| Condition | used |
This 2020 Taylor X360M is a used high-capacity diesel forklift available in Dallas, Texas. Its stated capacity is 36,000 lb at a 24-inch load center. The hour meter currently shows 7,765 hours.
The machine runs and operates. No additional repairs, recent service work or known defects have been reported. It is offered without a warranty.
The included SSFP is a side-shifting fork positioner. It allows the operator to adjust fork spacing and shift the fork carriage laterally from the operator compartment. Buyers should confirm that the attachment range, fork dimensions and overall configuration suit their loads.
This Taylor X360M can be evaluated for high-capacity industrial material-handling work requiring a diesel pneumatic forklift, an enclosed operator compartment and long forks. The stated 36,000 lb rating applies at a 24-inch load center. Actual allowable capacity can change with the load center, lift height, attachment and operating configuration.
A data plate or load chart was not available for this listing. Buyers should verify the machine’s rating and configuration for their intended load before purchase or operation.
Contact Nick Fiene at Forklift Exchange to discuss availability, request current photos or arrange an inspection. Ask about transportation separately; no shipping terms or lead time are represented in this listing.
